Jewelry Soup: Diamond Ring Jewelry, Color And Clarity Of Good Diamond Engagement Ring

Jewelry FAQ

Jewelers by Metros

Welcome to JewelrySoup

1 2 3 4 5 6 7 8 9 10 Page: 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Question: If I buy a diamond ring how do I know that it isn't a conflict diamond?

The reason I ask is that I would hate to support the trade of such diamonds

Answer: You wouldn't know, they lie. The diamond trade is bad ...

You wouldn't know, they lie. The diamond trade is bad and it is going to get worse. I went to Africa on trip..It was horrible at some of things they told me. I llove diamonds though

Answer: CanadaMark diamonds are apparently the only conflict-free ...

CanadaMark diamonds are apparently the only conflict-free diamonds certified by the Conflict Free Diamond Council.

Answer: most diamonds are conflict diamonds, I want to buy a diamond ...

most diamonds are conflict diamonds, I want to buy a diamond ring for a few months now but I have the same issue like you, so I am kind of torn between the beauty of diamonds and worrying if I buy diamond I will be supporting the conflict

Answer: Buy them from the National Park in Arkansas....keep the ...

Buy them from the National Park in Arkansas....keep the scandal money in the country. I'd be more concerned they were trying to palm off cz. EDIT: If you are that concerned, try buying old jewelry, crafted before the issue arose. It is very simple to remove the stones, and you will be recycling at the same time. It's the market that drives the CSO....even buying Canadian feeds the market. The money may go elsewhere, but it is still a "new" diamond.

Answer: ok I did a research project on this. don't go to any ...

ok I did a research project on this. don't go to any jewelry store like kays or tiffanys. go to a jeweler, real one they aren't conflict diamonds and also blood diamonds are illegal and the US doesnt sell them. If you go to a real jeweler you will get the best price and quality

Answer: your a good person! I would say to ask the dealer, but I ...

your a good person! I would say to ask the dealer, but I learned that expensive diamonds are less likely to be conflict

Answer: Canadian diamonds are not conflict diamonds. They have an ...

Canadian diamonds are not conflict diamonds. They have an insignia engraved on them that you can only see with high magnification that sets them apart from the others.

Answer: I have made a decision to only buy cubic zirconia, Much ...

I have made a decision to only buy cubic zirconia, Much cheaper and no one dies :) Cubic zirconia are just as beautiful as real diamonds and no one will know the difference. If you are giving the diamond to someone, just let them know why you chose that kind of stone.

Answer: It is impossible to know for a consumer. If you buy through ...

It is impossible to know for a consumer. If you buy through a normal (famous) jeweler, the chance to get a blood diamond is very, very small <1% even ! (maybe have a look at www.diamondfacts.org)

Answer: In all honesty, you wouldn't be able to find out 100%. ...

In all honesty, you wouldn't be able to find out 100%. What we do know in the trade and our perspective is this. Conflict diamonds were a significant issue in the mid to late 90's. Since the late 90's and early 21st century the issue was addressed to many major companies and countries that participate in the mining of rough diamonds. Since then the effort to work against conflict diamonds and to safeguard the integrity of the industry has resulted in the Kimberley Process adopted in 2003. The KP is a 3 step process to help minimize conflict diamonds in the trade. Please refer to wikipedia, or google searches in regards to the Kimberley Process. Although steps have been taken to address conflict diamonds there is really no 100% guarantee that every diamond found in modern markets is conflict free. In regards to using an old diamond, I doubt that is a guarantee since diamonds and all other precious commodities have been used for many years to fund propoganda campaigns, just because the stone is older doesn't guarantee the fact that it was conflict free. But what I do have to say is this. Conflict diamonds represent only a very minor percentage of diamonds mined every year for the jewelry and industrial industries. What you need to logically think of is this. What are the chances of you purchasing one? In addition be aware that there have been countries and companies that have been cited, warned, or kicked out of doing business in the trade because they were unable to prove papers or sources for certain diamonds that were being sold. All in all there are many more good that comes from the diamond industry then bad. I also see that someone has told you to check out diamond facts.org. It is a shame on humanity that conflict diamonds do exist but by logically think through and weighing the facts and chances of your purchase actually being a conflict diamond, you'll find that the chances are more that the diamond came from a legitimate source and provided a worker with an income to support his family and living. If you don't mind spending possibly up to 30% or more for peace of mind then purchase a Canadian mined diamond. They advertise their diamonds as conflict free since there are no wars to speak of in Canada. I hope this helps settle your concerns and I also look forward to a day where no commodity or resource is used for propaganda or harm.

Question: Can you get an old diamond ring restored?

As for the metal the color has faded and looks old, and the diamonds look dull. Can I put it in another gold setting?

Answer: Take it to a local jeweler (not one of the chains in the ...

Take it to a local jeweler (not one of the chains in the mall, they will over charge you, and also not do a very good job) and they can do work on it. They can defiantly put it in a new setting, and clean up the diamonds.

Answer: If its white gold then you need to have it rhodium plated, ...

If its white gold then you need to have it rhodium plated, to get the luster back. Either way you can clean it yourself first with some soapy dishwater and a toothbrush. To polish the metal you can buy a polishing cloth, they have them at the jewelry section in department stores. If all that doesnt do it then you can still put it in another ring setting!

Answer: Getting the gold to sparkle should not be a problem, all ...

Getting the gold to sparkle should not be a problem, all that would require would be a re polish and in he case of white cold, possibly re rhodium ed. The Diamonds however could be more of a problem. The first thing I would recomend is cleaning the ring throughly. I have posted a link for a great way to clean the ring and Diamonds. http://www.wightmangoldsmiths.co.uk/jewellery%20clean.htm After you have done this check to see if the Diamonds sparkle. If they still don't then I am afraid they may never do. If the Diamonds are in a rub over setting then you maybe able to get them to look a little more sparkley if they are put in claw settings. This is because a claw allows more light into the stone. If you would like to know more about Diamonds, why they sparkle and information on Diamond grading, here is a link to some articles you may find interesting, http://www.wightmangoldsmiths.co.uk/diainfo.htm Putting your Diamonds in another setting should not be a problem. If you wish to do this then take it to a good Goldsmith or jeweller and they should be able to do what you want. Here is more information on restyling a ring, http://www.wightmangoldsmiths.co.uk/restyling.htm I hoe this is helpful to you

Question: which is bigger 3/4 or 1/2 ct diamond ring?

Answer: last time I checked 3/4 was bigger than 1/2 no matter what ...

last time I checked 3/4 was bigger than 1/2 no matter what you're talking about.

Answer: logically, wouldn't 3/4 be a bigger cut? I don't ...

logically, wouldn't 3/4 be a bigger cut? I don't know though. sorry

Answer: ditto

ditto

Answer: Okay, simple math: 1/2=2/4, and 3/4 is bigger than 2/4 cuz 3 ...

Okay, simple math: 1/2=2/4, and 3/4 is bigger than 2/4 cuz 3 is bigger than 2. so yeah, 3/4 ct would be bigger

Answer: well 3/4 > 1/2 so you tell me

well 3/4 > 1/2 so you tell me

Answer: 1/2 equals 2/4-obviously 3/4 is larger

1/2 equals 2/4-obviously 3/4 is larger

Answer: think of it this way: 1/2 = 50% 3/4 = 75%. 3/4 would be ...

think of it this way: 1/2 = 50% 3/4 = 75%. 3/4 would be bigger

Answer: a 3/4 ct. diamond ring is bigger than a 1/2 ct. diamond ...

a 3/4 ct. diamond ring is bigger than a 1/2 ct. diamond ring. SHINY!!

Answer: if you dont know which is bigger maybe you should stick to ...

if you dont know which is bigger maybe you should stick to zirconium

Answer: 3/4 is bigger...think about it this way...if you had two ...

3/4 is bigger...think about it this way...if you had two pies, and you cut one into 4 pieces (2cuts through the middle of the pie, giving you 4 equal pieces...) and the other one into 2 equal halves...then the pieces from each pie 1/2 and 3/4 would not be equal. 1/2 is equal to only 2/4 of the pie, but you have 3/4 which is bigger. By the way...The standard size of a diamond engagement ring is between 1 and 2 cts. (carats). Girls, don't accept anything less... Love is the most important thing in the world, but society has turned the ring into a symbol of what the man you love thinks you're worth. Most men work hard and save up to give a girl the kind of ring she deserves...any man who thinks this doesn't matter, doesn't value what a treasure you are to him... Marriages can't survive their ups and downs if you aren't financially stable. A man who can't afford a proper ring for you to wear on your finger the rest of your life doesn't know how to save or have any money in the bank...The man you love should be responsible and hardworking, and should be able to prove it.

Answer: of course the 3/4 than the 1/2 because 3/4 equals 75% (math ...

of course the 3/4 than the 1/2 because 3/4 equals 75% (math used) && 1/2 equals 50%, 75% is the greatest amount, so 3/4 ct is bigger.!

Answer: 3/4 is bigger than 1/2.

3/4 is bigger than 1/2.

Answer: 0.75 > 0.50

0.75 > 0.50

Question: What should the color and clarity be for a good engagement ring diamond?

Answer: si1 or si2, a is colorless, and as you work you way through ...

si1 or si2, a is colorless, and as you work you way through the alphabet it gains color. it all depends on your budget.

Answer: The best color quality starts at "D" and works its ...

The best color quality starts at "D" and works its way down the alphabet. The clarity can be from Fl (flawless) down to I (imperfect). FL Flawless - No internal or external imperfections visible using a 10X microscope. IF Internally Flawless - No visible internal imperfections, but may have minor surface blemishes visible when using a 10x microscope. VVS1-VVS2 Very, very slightly included - Inclusions that are extremely difficult for a skilled observer to locate using a 10x microscope. VS1-VS2 Very slightly included - Very small inclusions that are very difficult for a skilled observer to locate using a 10x microscope. In rare instances, with larger stones, some VS1/VS2 inclusions can be seen with the naked eye, after first being located using a microscope. SI1-SI2 Slightly included - Refers to diamonds which have small inclusions that can be easily located using a 10x microscope. In some instances, such inclusions can be seen with the naked eye, after first being located using a 10x microscope. I1-I3 Imperfect - Medium to large inclusions which are readily apparent to a skilled observer with the unaided eye.

Answer: Really, you shouldn't go any lower in clarity then SI1. ...

Really, you shouldn't go any lower in clarity then SI1. Color is a matter of taste - and I have to mention, more important then color is cut - the physical proprtions of the stone. A higher quality cut can disguise a lower quality color, and this means a better value for your dollar. You can gain as much as 2 color grades to the eye when you go with an Ideal cut stone vs a Good. Go to your local, independent jeweler and have them show you the difference between different quality stones. Don't go to a mall jeweler, and do not buy online, and rely on the letter grades on the paper - a D, Flawless can look really crappy if it's cut poorly.

Question: How much is my diamond ring worth?

1.8 Carot F color I2 Clarity 3 stone, princess cut in 14k white gold.. Help?!?

Answer: 100,000

100,000

Answer: Have it appraised. Nobody can tell you how much it is worth ...

Have it appraised. Nobody can tell you how much it is worth without seeing it.

Answer: Get it appraised by an independant appraiser. They will be ...

Get it appraised by an independant appraiser. They will be able to tell you. However, I wouldn't expect much because even though the color is excellent, the clarity is much to be desired. An I2 clarity diamond is very included and not that rare.The more inclusions that you can see with the naked eye, the less it is worth.

1 2 3 4 5 6 7 8 9 10 Page: 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33